Click Here
advertisement
CNET Labs:
Tune-up: Setting up a Wi-Fi home network
 
By Mitt Jones
(June 10, 2004)

To set up your Wi-Fi network, you'll need a wireless router (top), plus a wireless adapter for each system you're connecting. Use a PCI card (middle) for desktops and a PC Card (bottom) for notebooks.
A broadband connection brings the Internet into your home at blazing speeds. And with a wireless, or Wi-Fi, network, you can get that access on multiple computers throughout your home--and even outside--without cords. What's more, today's wireless-networking products make broadband Internet sharing not only easy and inexpensive but also secure. In this Tune-up, we'll show you how to distribute broadband Internet access among multiple notebook or desktop systems, and we'll walk you through the necessary steps to keep your network protected.

The core of a Wi-Fi network is a wireless router or gateway. We used the D-Link DI-624 AirPlus Xtreme G 802.11g router, which sells for $99 before a $20 rebate. You'll also need a wireless adapter for each system that's connecting to the network. We installed two D-Link AirPlus Xtreme G 802.11g wireless adapters: a DWL-G650 PC Card adapter for a Windows 2000 notebook PC ($65 before a $10 rebate) and a DWL-G520 PCI adapter for a secondary desktop running Windows XP Home Edition ($69 before a $10 rebate). The primary PC, connected to the router via Ethernet cable, was running Windows XP Professional.

 
Step 1: Prepare for installation
Step 2: Install the wireless router
Step 3: Configure the router
Step 4: Install the wireless adapters
Step 5: Configure the wireless systems
Step 6: Set the password
Step 7: Set the SSID
Step 8: Enable encryption
Step 9: Filter MAC addresses
Step 10: Configure Wi-Fi systems
Share and share alike
Network networking
Mitt Jones is a contributor to Computer Shopper magazine.

Tune-up is featured monthly in Computer Shopper magazine; this originally appeared in the July 2004 issue.