|
CNET editors' surround sound buying guide:
Separate surround sound speakers![]() If you're feeling surrounded by questions instead of ambient sound, you've come to the right place. We have suggestions on how to shop for everything surround, from receivers to speakers to full home-theater systems. Separate speakersCherry-picking the front, center, surround, and subwoofer speakers, you can better select the solution that meets your precise needs. We'll also let you know how best to blend your current speakers into a surround setup. Separate speaker basics: Speaker-matching Q&A | Front-left and front-right speakers | Center speaker | Surround speakers | Subwoofers | Getting wired Speaker-matching Q&AQuestion: Multibrand matching--can I use my old speakers and new ones together in a surround system?Mixing a different brand of surround speaker or subwoofer with your stereo speakers might be a risky proposition. Center speakers are the trickiest; mismatching the left-center-right speakers may result in jarring timbre shifts when the sound is panned across the front three speakers. Matching surround speakers is less critical, but in any case, try to arrange a home audition. Question: Unibrand matching--do all JBL speakers go together? Can I match big towers and small surrounds? Chances are same-brand speakers of a given vintage will sonically match, but when in doubt, check with the company's customer service people. And sure, you can match large and small speakers in one system. Question: What's the lowdown on subwoofer matching? Matching subwoofer to satellites is in some ways the easiest chore. The safest bet is to stick with the same brand. One rule of thumb is to mate small sats with small subs; if the sats have 4-inch or smaller woofers, better stick with a fairly small sub with an 8-inch woofer. Larger sats will do their best with larger subs that have 10- or 12-inch woofers. What to look for: front speakers![]() Infinity Primus 360 What to look for: center-channel speakers![]() NHT SC-1 What to look for: surroundsThere are two types of surround designs:1. Monopole The conventional surround speaker looks like a standard satellite speaker. These monopole speakers aim the sound straight ahead. Most HTIBs and entry-level speaker packages use this type of surround speaker. They will also work well in higher-end systems and SACD/DVD-Audio-oriented music-surround systems. ![]() Dipole speaker Speaker with this type of design pushes sound out to the sides. Their distinctive V-shaped front panels make them easy to identify. These speakers create a more diffuse surround sound than the monopoles. They're best suited to DVD movies and less desirable for multichannel music. What to look for: subwoofers![]() JBL PB12 Getting wiredBefore you buy any speaker wire, place the speakers and the receiver in the positions where they're likely to wind up, then carefully measure the distances. Remember to measure up and over door frames or windows. Just to be on the safe side, add at least two extra feet to each cable run; coming up short is no fun, and most stores won't allow you to return cut-to-length cables.In most cases, standard zip cord, available in any hardware store, will do nicely. If you need to run long (more than 20 foot) lengths between the receiver and the speakers, try to get at least 16-gauge wire (the lower the number, the thicker the wire). Specialty brands of speaker wire are more expensive but may deliver slightly better sound quality. More surround sound resources from CNETTop productsCNET editors' best 5 in home audio
CNET editors' top AV receiversCNET editors' top digital audio streamersCNET editors' top iPod speakersCNET editors' top Top tabletop radiosCNET editors' top satellite radio receivers (XM/Sirius)CNET editors' top home theater systemsCNET editors'top virtual surround HTIBsCNET editors' top surround speaker packages
CNET editors' top virtual surround speakers
CNET editors' top subwoofersCNET editors' top PC speakersCNET editors' top universal remotes |