high-end audio

Boston Acoustics was in Manhattan earlier this week to demonstrate its new Vista Series speakers. Boston kicked up the styling and all of the speakers feature radical "wave-like" curves and drop dead gorgeous lacquer paint jobs. The high gloss black was beautiful, but the cherry wood was a knockout! Really hot stuff and durable too -- one of Boston's people actually took out his keys and tried to scratch the speaker's paint -- but the finish remained pristine.

That's nice, but wouldn't mean much if the speakers didn't sound great. The demo was … Read more

Would you buy a Ferrari for $1,050? OK, how about a $1,050 headphone amplifier?

The Woo Audio WA6 Special Edition headphone amp is built to Ferrari levels of quality and performance. Even before I listened to it, I knew it was going to be amazing.

It's a two-piece design. One chassis contains the power supply, the other is the amplifier proper. The pewter color, die-cast chassis parts are finished to a high standard, fully equal to $10,000 stereo amplifiers I've reviewed, but the WA6-SE is a good deal smaller than your average high-end amplifier. The two chassis together fill just 11.25 inches by 10.25 inches of shelf space.

The WA6-SE is a pure tube design, without a single semiconductor or integrated circuit in the entire amp. It's hand-crafted in New York's Queens borough, and there are no printed circuit boards; all wiring is point-to-point hand-soldered. Woo Audio builds each amp to order, so it can incorporate custom options and offer a wide range of upgraded parts. Current build time is about three to four weeks.

Woo Audio offers an extensive range of headphone amplifiers. Prices start at $470 for the Woo Audio 3; the top-of-the-line WA5 LE runs $2,400. When I heard the $585 WA6 amp a few months ago, I was knocked out by its sound. … Read more

If you're not in the "club," high-end audio might look like a bastion of elitist snobs and the idle rich, so it may come as a shock to note that some of high-end audio's greatest engineers started out in rock and roll. Take John Curl, in the early 1970s he worked his magic on the Grateful Dead's concert and recording sound systems and later kept the Jefferson Airplane aloft. That was just before he tackled film sound in Hollywood. All of that led to collaborations with high-end pioneer Mark Levinson; together they raised the stakes, considerably, with the JC 2 stereo preamplifier in 1974.

It didn't matter that the JC 2 was two or three times more expensive than any other component in the nascent high-end market; a lot of folks lucky enough to hear it and afford it bought it. The JC 2 had that effect on people. Curl and Levinson soon parted ways and over the next few years Curl designed a long run of cutting edge electronics for other companies. Levinson eventually departed the company that bears his name, and his old company now designs car audio systems for Lexus. High-end is in the big time now.

When I heard that Curl had finished work on an all-new Halo Series JC 2 stereo preamplifier for Parasound I had to check it out (it's like hearing that Carroll Shelby just built a new AC Cobra). Better yet, for this review Parasound sent along a pair of the matching Halo Series JC 1, 400 watt mono power amplifiers. I reviewed the all-new JC 1 & JC 2 combination for Home Entertainment magazine, you can read the review here.

The JC 1 is a seriously powerful amplifier, its output stage employs nine pairs of high-current bipolar transistors with massive heat sinks to insure long-term reliability. Each amplifier can deliver 400 watts to 8 ohm rated speakers, and 800 watts to 4 ohm models, and if your speakers ever dip as low as 2 ohms, the JC 1 will happily serve 1,200 watts! The JC 1 sounds potent, even when listened to at merely moderately loud levels, and maintains its composure at lease breaking, call-the-cops volume. … Read more

MartinLogan, based in Lawrence, Kansas, maker of highly regarded curved panel electrostatic speakers announced yesterday that its Design Series models are now available through Amazon (Amazon is the only authorized Internet retailer of MartinLogan speakers).

MartinLogan's unique technology produces sound with far greater detail than conventional "box" speakers--it's high-definition for the ears. I think MartinLogans are also beautiful and elegant, which doesn't hurt. M-L's technology was also used to create stylish in-wall, on-wall and floor-standing speakers, and many of the speakers qualify for Amazon.com's free Super Saver Shipping or free two-day shipping (… Read more

If you think high-end audio has to be boxy and/or kinda masculine, check out Pathos Acoustics wares. We think it's hot stuff, and when we've heard it at shows the sound was always pretty impressive. Pathos gear combines vacuum tube and solid-state technologies to eke out the very best from both.

Pathos Acoustics was founded in 1994 by three engineers, Gaetano Zanini , Gianni Borinato and Paul Andriolo in the Italian city Vicenza. Pathos developed a new amplification circuit they called INPOL (Inseguitore a Pompa Lineare = Linear Pump Tracker). All Pathos products are still handcrafted in Vicenza. They … Read more

Back in the day, we built great cars and the best TVs. And our advanced engineering was the envy of the world.

That was a long time ago. Today "world-class" design and manufacturing is mostly sent off-shore to Europe and Asia. American companies market and distribute products made somewhere else. According to American Economic Alert, the U.S. has imported $250 billion worth of goods and services more than we exported so far this year.

High-end audio is one area where made in America products are still truly world class. While the major brands like Audio Research, Ayre, … Read more

The Federal Economic Stimulus program checks are in the mail. When you get yours try and be a good consumer and spend it right away. That'll help our economy and remember the checks will do the most good if they're spent on made in America products. One of my favorite high-value, high-end audio brands, Outlaw Audio, would be a good place to start. Its multi-channel home theater power amplifiers are in fact proudly made in the USA. Outlaw sells direct on its website and all of their amps are now on sale--with free FedEx Ground shipping! If you'… Read more

Stereophile magazine sponsored the Festival Son & Image show in Montreal, Canada, that ran from April 3 through the 6th. The show was the largest ever, with over 120 brands represented. True, most are unknown outside of audiophile circles, but that's part of the appeal. These small companies aren't trying to dumb down their products to reach a mainstream market, no, they just build the best sounding speakers, amplifiers, CD players and turntables they can. Many are hand crafted, lavishly designed products. Point is, in a world where true quality, as opposed to marketing hype, is the rarest … Read more

The Hansen Audio Prince V2 speaker's liquid curves and physical presence demands respect--it all but shouts "this is very serious audiophilia," made for those with ears who appreciate the very best. Well, not just ears, but the means to indulge their vices. The 42 inch high speaker is small enough to fit in an apartment, at least an apartment with floors that can support the 540 pound weight of a pair of these $39,000 speakers.

Fellow Brooklynite Wes Bender, Hansen Audio's Senior Director and National Sales Manager, had me over to audition the speakers. Too bad he didn't have the top of the line King V2s that run $84K a pair, but if that's too rich for you, the Elixirs will set you back a mere $18K. So you see high-end audio is not so different than high-end cars... Lamborghini's new supercar, the Reventon is fourteen times more expensive then the fastest Corvette, but only a little bit faster. That wasn't a problem for Lamborghini, the entire production run sold out before the car was even built. Hansen Audio is likewise pushing the limits of what's possible in speaker design, and that's an inherently expensive proposition. Get over it.

Every aspect of these speakers' design was conceived with performance in mind, so that means not only are most of the drivers designed, engineered, and built in Hansen's Canadian factory; extraordinary efforts were expended on the speaker cabinets to better serve the sound. Which in the case of speakers, the best cabinet is the dead cabinet (acoustically inert), so the only sound you hear with Hansen speakers is the sound created by their drivers. Mass market speakers never get close to that ideal, their cabinets' "sing along" with the drivers, substantially coloring the sound.

The Hansen speakers' paint job also deserves special mention, it's the only element of the design not handled directly by Hansen. It's outsourced to a world famous luxury car manufacturer's factory in Toronto. Painting a pair of speakers takes five days and is a sixteen step process.

The "Hansen Composite Matrix" cabinet is a three-layer composite formulation (proprietary to Hansen) -- each layer is a different thickness from the other. Hansen's "Cloaking Device," the forth and final layer and is applied by hand to the internal cabinet. This sort of no holds barred design fanaticism is what separates high-end from mass-market brands, the drive to make the very best at any cost. … Read more