The Pioneer flagship receiver that won our Editors' Choice Award in 2009 is back in its third generation as the AVIC-Z130BT. This all-in-one receiver is something of a car tech magic bullet, rolling GPS navigation, audio and video playback, and hands-free calling into one box, ready to be installed inyour car's dashboard. Over the years, the AVIC-Z series has picked up a few new tricks, including Pandora Internet Radio integration. This year Aha Radio integration joins the party via an iPhone app, as well as HD Radio reception for audio and traffic data. So does the AVIC-Z130BT still have what it takes to keep up with the competition or is it starting to show its age?
Hardware and installation
There's not much to look at on the AVIC-Z130BT's faceplate when it's powered down. The unit is mostly controlled via touch screen, but there is a bank of capacitive buttons along the lower bezel of the 7-inch WVGA display. From left to right are voice command, volume down and up, home, mode, skip back and forward, and eject.
Power the unit up, however, and the massive display comes to life and the capacitive buttons illuminate. Out of the box, the buttons cycle through a spectrum of backlight colors, but you can pop into a menu and select any color you would like, for example to match the rest of your vehicle's interior lighting. We'll talk more about what is displayed on that screen in the interface section.
Tapping the eject button brings up a menu that gives the option to open the motorized faceplate to insert or remove a CD or DVD from the AVIC's optical drive, or adjust the screen tilt angle.
Even the basic installation of the AVIC-Z130BT is slightly more involved than most all-in-one receivers. After making the standard power and speaker connections via the included wire harness, we had to install, route cables for, and connect an external GPS antenna and a microphone. We also tapped the parking brake sensor to enable functions that only work when the vehicle is parked and made the optional speed sensor connection that should help the navigation system's accuracy. There's also a 6-foot USB/analog stereo auxiliary input combo cable that needed connecting--In most vehicles that's more than long enough to reach the glove compartment or center console. Where the AVIC-Z130BT differs from other units we've installed is that Pioneer includes a separate traffic tuner that must be installed in-line with the AM/FM radio antenna and connected to a power output on the AVIC's back panel.
Those who want to expand the AVIC-Z130BT beyond its core feature set will find a veritable smorgasbord of connections on the unit's rear. There's an input for adding a wired remote, an IP-BUS for connecting an XM or Sirius Satellite Radio tuner, and a dedicated video input and reverse gear lead for a rearview camera. Permanently located on the back panel are dedicated, stereo subwoofer preamp outputs and a video output. On a removable pigtail, you will find a video input, a stereo audio input, front and rear stereo audio outputs, and a rear monitor output. That's more than enough in the way of connections to input from or output to pretty much any car audio component you may want. However, if you're making all of these connections and using the traffic tuner, you'll have to be careful to make sure there's plenty of space behind your dashboard to fit everything.
Interface and digital audio sources
The main menu consists of three large icons for the AVIC-Z130BT's three major functions: Destination, Telephone, and A/V Source. Under the Telephone menu, you'll find all of the options for initiating a hands-free call, including an onscreen dialer and access to your phone's address book if you chose to sync during the pairing process.
If there's one way the AVIC-Z series has managed to improve year after year, it's by constantly adding new options to its long list of digital audio sources, all of which you'll find under the A/V Source menu.
Of course, you have the standard CD/DVD playback with MP3/WMA/AAC and DivX decoding. There's also a USB connection for external digital storage devices, a 3.5mm auxiliary input for connecting MP3 players, and an SD card reader for the handful of you who like to carry your audio around on SD cards. Bluetooth audio streaming means you can wirelessly connect a smartphone for listening to music or podcasts. However, things get interesting when an Apple iPhone is connected to the USB port.
The iPhone (and to a lesser degree the iPod Touch) opens up not one, but three additional digital audio sources. The first is standard iPod playback, which gives access to the music, audiobooks, and podcasts stored locally on the device. You can browse the available audio using the touch screen, but there's also a safer option available while driving. When an iPhone or iPod is connected to the AVIC-Z130BT, Pioneer's voice recognition engine will scan the device and create voice tags that can be accessed with the touch of a button. Simply hit the VR button and say, for example, "Play artist Kid Cudi" and the AVIC will create a playlist of songs by that artist. There's also a passenger control mode, which turns control of song selection back over to the iPhone's touch screen, allowing a passenger to pick and queue songs from there.