Although it houses a 3.5-inch hard drive, the Asus WL-700gE looks like most other wireless routers and is only a bit bigger. Its white top and bottom sandwich the router's silver sides, presenting an understated and clean design. Nine indicator lights adorn the front panel: five for connected LAN and WAN ports and one each to show wireless activity, hard drive activity; on/off status (conveniently located on the power switch), and the status of the router's "readiness" for use.
You'll also find a USB 2.0 port and a copy button on the front panel. The USB 2.0 port can be used for additional storage or sharing a peripheral, such as a printer, across your network. If you connect a USB storage device to the router and hit the copy button, the contents on your USB device--say, a portable hard drive or a thumbdrive--will be copied to the router's hard drive. The WL-700gE can also use external drives as a part of a RAID array.
Like virtually all routers on the market, the unit's back panel features five 10/100 Ethernet jacks, one of which is a dedicated WAN port, along with an antenna and a reset button. Unlike most routers, the back panel also supplies two additional USB 2.0 ports and an EZSetup button. The WL-700gE has four rubberized feet on its bottom, and Asus ships the router with a weighted base to prop it up for vertical use.
EZSetup is Asus' proprietary configuration utility for Windows-based computers. Though the configuration utility is straightforward and simple to use, like most things about the WL-700gE, there are a few flaws: The EZSetup wizard says holding the button on the router for three seconds will cause the power light to flash, but the power light remains solid and the "ready" light flashes when the button is held. Through the wizard you can configure the most basic router settings including the type of Internet connection you have and the name and the security settings of the wireless network.
The second issue concerned mapping the hard drive. The EZSetup wizard can also map the router's hard drive to a Windows drive letter, but our attempts to do so--both in wireless and wired modes--proved futile. At the very end of the process, we received error messages that blamed our wireless adapter and suggested retrying, which led to subsequent attempts, all of which failed. In the end, the EZSetup wizard got us connected to our network and the Internet but failed to map the router's hard drive. We ended up manually mapping the drive. The EZSetup guide is simple to use but, clearly, isn't reliable.
All other configuration must be done from the router's downright confusing Web interface. Unlike other manufacturers that turn networking jargon into regular English or explain all the settings in their configuration interface, the WL-700gE's configuration pages are designed for geeks, and the tool tips often add to user confusion. One of the worst offenders is the configuration page for BitTorrent file sharing. A configuration question asks: "Enable download daemon?" and offers help by stating that "This field allows you to enable gift based download daemons, Gnutella and FastTrack. But this task is CPU consuming." We found out that giFT is a client for multiple peer-to-peer file-sharing networks, but that still leaves non-Unix geeks unclear on whether this option should be turned on.