Cisco Catalyst 4506-E specs

General

• Packaged Quantity 1
• Device Type Switch - 96 ports - Layer 4 - Yes - with Cisco Catalyst 4500 Supervisor Engine 6L-E, 2x Cisco Line Cards (WS-X4648-RJ45V+E)
• Enclosure Type Rack-mountable - 10 nm
• Ports 96 x 10/100/1000 + 4 x SFP (mini-GBIC)
• Power Over Ethernet (PoE) Yes
• MAC Address Table Size 55K entries
• Routing Protocol EIGRP,
  Static IP routing,
  RIP-1,
  RIP-2,
  MLD,
  MLDv2
• Remote Management Protocol Telnet,
  RMON 1,
  SNMP 2,
  SNMP 1,
  SNMP 3,
  RMON 2,
  RMON 3,
  RMON 9,
  SSH,
  SSH-2
• Authentication Method TACACS+,
  Secure Shell (SSH),
  RADIUS,
  Secure Shell v.2 (SSH2)
• Features Layer 2 switching,
  Traffic shaping,
  IPv6 support,
  VLAN support,
  PoE+,
  Port Aggregation Protocol (PAgP) support,
  Dynamic Trunking Protocol (DTP) support,
  IGMP snooping,
  Modular design,
  DHCP snooping,
  Multicast Storm Control,
  Jumbo Frames support,
  Trunking,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Quality of Service (QoS),
  Power over Ethernet (PoE)
• Compliant Standards IEEE 802.3af,
  IEEE 802.3x,
  IEEE 802.1Q,
  IEEE 802.1w,
  IEEE 802.1p,
  IEEE 802.3z,
  IEEE 802.3,
  IEEE 802.1x,
  IEEE 802.1D,
  IEEE 802.3ab,
  IEEE 802.3ad (LACP),
  IEEE 802.1s,
  IEEE 802.3u
• RAM 512 MB (installed) / 1 GB (max) - SDRAM
• Status Indicators Power,
  Port status,
  Status of modules

Expansion / Connectivity

• Interfaces 96 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45,
  1 x Console - RJ-45 - Management,
  1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 - Management,
  4 x SFP (mini-GBIC)
• Expansion Slot(s) 6 (total) / 3 (free) x Expansion slot,
  1 CompactFlash Card
• Installed Modules Qty (Max) 3 (installed) / 6 (max)

Power

• Power Device Power supply - hot-plug / redundant - Plug-in module
• Installed Qty 1 (installed) / 2 (max)
• Power Redundancy Optional
• Power Redundancy Scheme 1+1 (with optional power supply)
• Power Consumption Operational 2.8 kW

Memory

• RAM 512 MB (installed) / 1 GB (max) - SDRAM

Miscellaneous

• Width 17.3 in
• Depth 12.5 in
• Height 17.4 in
• Rack Mounting Kit Included
• Compliant Standards EN 61000-6-1,
  EN50082-1,
  AS/NZ 3548 Class A,
  EN55022 Class A,
  CS-03,
  FCC Class A certified,
  UL 60950,
  FCC Part 68,
  EN 61000-3-2,
  EN 60950,
  CE,
  EN55022,
  NEBS level 3,
  IEC 60950,
  EN55024,
  EN 61000-3-3,
  EN300-386,
  VCCI Class A ITE,
  FCC CFR47 Part 15,
  ICES-003 Class A,
  ACA TS001,
  AS/NZS 3260,
  CSA 22.2 No. 60950,
  JATE

Software / System Requirements

• Software Included Cisco IOS LAN Base

Environmental Parameters

• Min Operating Temperature 32 °F
• Max Operating Temperature 104 °F
• Humidity Range Operating 10 - 90%

Networking

• Networking type Switch
• Features [Jul 2, 2008 from CDS: Networking] Layer 2 switching,
  Traffic shaping,
  IPv6 support,
  VLAN support,
  PoE+,
  Port Aggregation Protocol (PAgP) support,
  Dynamic Trunking Protocol (DTP) support,
  IGMP snooping,
  Modular design,
  DHCP snooping,
  Multicast Storm Control,
  Jumbo Frames support,
  Trunking,
  Broadcast Storm Control,
  Access Control List (ACL) support,
  Quality of Service (QoS),
  Power over Ethernet (PoE)