CNET editors' review
- CNET editors' rating: stars Very good
Detailed editors' rating
- Reviewed on: 12/20/2000
Simple and Stylish
As long as you install the drivers first, installing the MovieMaker is as easy as it gets; just connect the device to an available USB port using the included cable. A quick-start guide explains what the ports are and what they do. The device is compatible with Windows 98, Me, and 2000; however, Mac users are out of luck. Figure on 100MB of disk space to install the bundled software.
The gray and shadow-blue Video Blaster looks sleek and elegant, even with a swarm of cables attached to it. MovieMaker has audio, video, and S-Video inputs, but it comes with only a single composite video and audio cable. Unlike the Dazzle Digital Video Creator, MovieMaker can't output to VHS videotape, just digital media.
The MovieMaker's minimum system requirements call for a 350-MHz or faster CPU with 32MB of RAM. But don't underestimate the amount of processing power needed to digitize the video or the RAM required to edit it. Based on our experience, we'd strongly recommend the fastest processor possible and 64MB or more of RAM, unless you intend to edit extremely short and simple videos. And a final but important note: Make sure you have plenty of disk space to store your videos as you capture and edit them; Creative Labs recommends at least 2GB. But with MPEG-1 files taking up approximately 16MB per minute at 2 mbps and MPEG-2 files taking approximately 31MB to 46MB per minute at 1 mbps to 6 mbps, you'll probably want more.
Software Does the Job
The Video Blaster MovieMaker's bundled software covers all the bases for capturing, editing, and outputting video. MovieMaker converts VHS videos from a VCR or camcorder to your hard drive. (Don't confuse this Creative Labs-branded software with Microsoft's Windows Movie Maker; they are not the same product.) When you start the analog-to-digital conversion with MovieMaker, there's a pause, then your hard drive spins up to accept the mountain of data. Soon, your video appears in MovieMaker's preview window as freshly converted digital data; it takes about as long to convert the video as it does to play it. Creative Labs provides a short manual on the MovieMaker hardware and software in PDF format on CD, which includes a thorough troubleshooting section and information on how to contact technical support. Continue reading

